ISO 1167 Plastic Pipe Hydrostatic Pressure Testing Machine
This professional testing equipment is designed for laboratory assessment to determine long-duration hydrostatic pressure failure time and instantaneous burst pressure readings of various plastic and composite pipe specimens. It applies progressively rising hydraulic pressure to replicate real-world service conditions, validating pipes' hydrostatic endurance and burst-resistant properties.
Core Component Composition
Pressure Control System: Delivers accurate pressure regulation throughout the testing cycle, covering parameter configuration, real-time dynamic tuning, and steady pressure holding to ensure reliable and precise test outputs.
Pressure Generation Device: High-pressure pumps transform low-pressure fluid into high-pressure liquid to supply consistent high-pressure water flow required for testing.
Constant Temperature Medium Tank: Governs the temperature of test medium (typically water) to maintain pre-set thermal conditions, as temperature significantly influences plastic pipes' mechanical performance.
Specimen Fixing Fixtures (End Caps): These fittings clamp pipe specimens firmly in place to prevent sample shifting and medium leakage during testing.
Automated Data Processing Unit: Features automatic computation of test data and supports printed test report generation.
Applicable Pipe Categories
Thermoplastic Pipes: Polypropylene series (PP-R, PP-B, PPA), Polyethylene grades (PE, PE-X), Polyvinyl chloride varieties (PVC, UPVC, PVC-C).
Composite Pipes: Examples include aluminum-plastic composite pipes that combine plastic and metallic layers to boost overall structural strength.
Compliance Standards
This equipment complies with international and regional standards including ISO1167-2006, ASTMD1598-2004, ASTMD1599, ISO9080, CJ/T108, ASTMF1335, EN 12201 - 1:2024, EN 1555 - 1:2021 and EN ISO 2507 - 2:2017.
Specimen Free Length Requirements
| Specimen Type |
Free Length Requirements |
| Extruded Pipe Specimens |
dn <315mm: ≥ 3dn and ≥ 250mm; dn >315mm: ≥ 2dn |
| Injection-molded Pipe Specimens |
dn <50mm: 3dn; 50mm ≤ dn ≤ 110mm: ≥ 140mm |
| Assembled Specimens with Hydrostatic Thrust (Two Pipe Sections) |
≥ 3dn and ≥ 250mm (dn >315mm: ≥ 2dn if min. length not met) |
| Assembled Specimens with Hydrostatic Thrust (with Fittings) |
≥ 2dn and ≥ 150mm; dn >250mm: ≥ 1.5dn |
| Assembled Specimens with Hydrostatic Thrust (Saddle Branch) |
≥ 100mm |
| Assembled Specimens without Hydrostatic Thrust |
= dn and ≥ 150mm |
Technical Parameters
| Parameter |
Specification |
| Model |
XGY-10C |
| Diameter range |
Φ8-1800mm |
| Stations |
3, 5, 6, 12, 15, 18, 20, 25, 50, 100 etc (customizable) |
| Control mode |
Micro-control, industrial PC control |
| Display mode |
Industrial PC LCD color display |
| Storage mode |
PC storage |
| Print mode |
Color printer output |
| Test pressure range |
0.1-10MPa |
| Control accuracy |
±1% |
| Display resolution |
0.01MPa |
| Working range |
5%~100%FS |
| Indication error |
±1% |
| Timer range |
0~10000h |
| Timer accuracy |
±0.1% |
| Timer resolution |
1s |
| Power |
380V 50Hz three-phase four-wire 1.5KW |
| End caps models |
from Φ8 to 1800mm |
| Water tank size |
According to pipe size |
| Temperature range |
15-95℃ |
| Dimensions (three stations) |
715×625×1700(mm) or others |
Support and Services
We offer full-cycle professional technical support tailored to Hydrostatic Pressure Testing Machines. Our proficient technical team delivers comprehensive after-sales solutions including:
- Complete equipment installation and on-site commissioning
- Professional fault diagnosis, technical analysis and operational guidance
- Systematic equipment repair and routine maintenance services
- Genuine spare parts and wearable component supply
- Official software iteration and function upgrade services
Adhering to the service tenet of high-quality customer support, our team is always available to resolve all your product and technical inquiries.
Frequently Asked Questions
Q1: What brand manufactures the Plastic Pipe Hydrostatic Pressure Testing Machine?
A1: This professional Hydrostatic Pressure Testing Machine is branded JHH, with independent production and manufacturing base located in Beijing, China.
Q2: What are the core application functions of the Plastic Pipe Hydrostatic Pressure Testing Machine?
A2: This testing equipment is professionally developed to evaluate the hydrostatic resistance and bursting strength performance of various plastic pipeline products.
Q3: What kinds of testable specimens are applicable to this Hydrostatic Pressure Testing Machine?
A3: The device supports testing for diverse plastic pipes and composite pipes, covering mainstream pipe types including PP-R, PP-B, PP-A, PVC, PE and PE-X.
Q4: What is the measurement precision of the Hydrostatic Pressure Testing Machine?
A4: The instrument features high testing precision, with a full-scale measurement accuracy error controlled within 0.1%.
Q5: What is the maximum test pressure range of the Hydrostatic Pressure Testing Machine?
A5: This equipment is capable of conducting pressure tests at a maximum pressure of 10Mpa, equivalent to 100 bar (1450 psi).
